PROBIRT Forums: Stripped screw holes in plastic

Featured Member

ID: blucheer
Since: 8/15/2010
From: Colville United States
Rating: (0.0)

Featured Picture

Pictures: Sharpening Drills - Finish Position

Google Ads

Active Topics Display List of Forum Members

Memberlist

Help

Flute/Piccolo
PROBIRT Forums » Flute/Piccolo

Topic: Stripped screw holes in plastic

Author

Message

<< Prev Topic | Next Topic >>

marcorosano
Newbie
Newbie

Joined: February.05.06
Location: United States
Online Status: Offline
Posts: 7

Posted: September.22.06 at 8:58pm \| IP Logged

Hi All, I'm curious about what methods people use to repair stripped screw holes on plastic piccolos (and clarinets). I have a plastic Gemeinhardt on which the rib was partially torn out of the body, thereby pulling 2 of the screws out and stripping the holes. I'd love to hear your various methods of dealing with this type of problem.

P.S., thanks to everyone for your contributions to this site; it's a phenomenal resource that I've learned much from.

Thanks,
Marco

LarryMueller
Technician & Clinician

Joined: January.20.05
Location: USA
Online Status: Offline
Posts: 24

Posted: September.23.06 at 2:21pm \| IP Logged

Marco,

On wooden instruments, I would use grenadilla dust and super glue to fill,
and then redrill. Many plastics get brittle around super glue, so I would have
to go with my second choice, which is epoxy, preferrably the longer setting,
harder variety. Then, redrill to tap size, and let the screw form the threads.
A slight bit of heat on the screw might help with this, but you don't want to
goober up the epoxy, which won't take much heat. You could also cut a
vertical groove in the screw with a dremel, so it acts like a tap, if needed.
You might also add a bit of epoxy to the underside of the ribbing when
replacing it.

Larry

marcorosano
Newbie
Newbie

Joined: February.05.06
Location: United States
Online Status: Offline
Posts: 7

Posted: September.24.06 at 7:53pm \| IP Logged

Thanks for the info, Larry. One thing I wasn't quite clear on: When you use epoxy, do you also use some sort of dust/shavings, or do you just fill the hole with epoxy?

Thanks again,
Marco

P.S., I've watched all your videos and learned a lot from them. I'm relatively new to this trade, so it's great have so much good info available.

LarryMueller
Technician & Clinician

Joined: January.20.05
Location: USA
Online Status: Offline
Posts: 24

Posted: September.25.06 at 5:47am \| IP Logged

I've just used the epoxy straight. But yes, you could mix in some plastic
shavings or dust. If a good hard epoxy, it should go well. The Armstrong
brand is very good but is white in color. You could color in after it hardens
with a magic marker. It's available from some of the suppliers, maybe
Allied? I usually just use whatever from the hardware store. The longer
setting epoxies tend to harden up better.

Larry

marcorosano
Newbie
Newbie

Joined: February.05.06
Location: United States
Online Status: Offline
Posts: 7

Posted: September.27.06 at 12:01am \| IP Logged

Thanks Larry -

The 2 hour epoxy that I had on hand worked great.

Take care,
Marco

If you wish to post a reply to this topic you must first login
If you are not already registered you must first register

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Login

New Member Registration
Retrieve Lost Password

Shout Box

(10/9 17:13) ChrisHarnett: Doesn't seem very promising
(10/6 12:46) DriverDrobina: Is this site still active?
(10/6 12:45) DriverDrobina: I have the same concern
(6/2 17:51) Wailinfree: is this site still active?
(6/2 17:51) Wailinfree: is this site still active?
(4/29 12:46) BENSCHILDGEN: Cleaning snakes nowdays SUCK!
(12/4 22:44) dparker: Hey Brent!
(11/26 20:46) crousfrench: I'm back. Did you miss me?
(10/9 7:18) BENSCHILDGEN: What's going on out there?
(6/1 18:53) dparker: dparker@ciomit.com www.ciomit.com
(6/1 18:53) dparker: or we can do an online meeting
(6/1 18:53) dparker: It can be dangerous. If you could send some pic
(5/25 5:17) BENSCHILDGEN: It seemed as if it was silver brazed together
(5/25 5:17) BENSCHILDGEN: It seemed as if it was silver brazed together
(5/25 5:9) BENSCHILDGEN: I had an old tuba that I could not get it apart.
(5/25 5:8) BENSCHILDGEN: I just do not know much about the whole mechainsm
(5/24 14:2) dparker: How can I help with the clock springs?
(5/24 14:2) dparker: How can I help with the clock springs?
(5/18 5:9) BENSCHILDGEN: MAYBE THIS SITE SHOULD BE LINKED TO FACEBOOK
(4/26 7:20) BENSCHILDGEN: I need info on tubas with clocksprings for levers
(4/4 8:34) dparker: Indeed! I will be posting more soon!ore soon!
(3/30 11:36) BENSCHILDGEN: Let's try to get this site flowing again
(7/6 19:46) Krch: My favorite is uses for electric soldering guns!
(6/13 9:0) crousfrench: I still enjoy watching the videos over and over
(6/13 8:59) crousfrench: I haven't seen anything new in awhile, but
(5/31 21:36) Krch: articles...articles