PROBIRT Forums: Just curious…

Featured Member

ID: admin
Since: 3/10/2005
From: Annville USA
Rating: (0.0)

Featured Picture

Google Ads

Active Topics Display List of Forum Members

Memberlist

Help

Other Repair Topics
PROBIRT Forums » Other Repair Topics

Topic: Just curious…

Author

Message

<< Prev Topic | Next Topic >>

MattStevens
Technician

Joined: January.19.05
Location: USA
Online Status: Offline
Posts: 3

Posted: May.06.05 at 12:13pm \| IP Logged

I was curious about how everyone has learned their craft. Who here was trained through a school? Apprenticeship? or self-taught? I spent four years training side-by-side with a fantastic repairman, and now after a couple years on my own, I'm wondering how everyone else did it.

Thanks,
Matt.

KarlPratt
Technician

Joined: January.21.05
Location: USA
Online Status: Offline
Posts: 0

Posted: May.08.05 at 7:04am \| IP Logged

I went to Red Wing,drove 182 miles/day for 9 mos, then I worked in a small Overhaul shop for about 1 yr, then I moved to a store that was 3x volume and got a real education. I have attended most of the regional clinics in my area, and also 6 NAPBIRT Annual Conferances. Next year the annual will be in my home state.

ChrisKane
Technician

Joined: January.26.05
Location: USA
Online Status: Offline
Posts: 0

Posted: May.11.05 at 7:58pm \| IP Logged

I started as a salesman in my store after college(BM). I did that for 3 years, but just I was about to quit they offered me an apprenticeship in the shop. Now after 3 years of shop work, I know just how lucky I was.

nathanwallace
Technician

Joined: February.06.05
Location: USA
Online Status: Offline
Posts: 0

Posted: May.17.05 at 11:10pm \| IP Logged

I went to work at the local music store at the urging of my high school band director. I thought I'd be doing retail, but the guys in back taught me how to clean and then repair clarinets. I did that almost exclusively for a couple of years (we had a lot of clarinets!). Then I decided I wanted to go to school. So I went to Renton Tech. for a year, riding busses for 2 1/2 hours each way, with an hour long trip to get to work on top of that. It made for a long year. Now I work on my own in a family run shop! It's pretty neat to be building a shop from scratch!

LarryMueller
Technician & Clinician

Joined: January.20.05
Location: USA
Online Status: Offline
Posts: 24

Posted: May.28.05 at 5:44am \| IP Logged

My private oboe teacher in high school encouraged me to do any minor repairs and adjustments I could, since oboe repair specialists are so rare. Many top oboists do their own tone hole and bore reaming (using files and sandpaper on a stick!) You'd be surprised by the amount of repairs and tuning adjustments I was shown by other performers (even if they can't level a pad or solder a key). I started working in music stores in college, as an apprentice. Many stores will apprentice an oboist, it's a good way to work into it. I have no repair school training. I learned half of what I know from major orchestra players, and half from experienced repair shop guys. After 20 years of dabbling with it, I got serious and studied with an oboe maker, and studied machining on my own. I keep it interesting by always studying techniques, or trying something new, always "moving forward".

motomom
Newbie
Newbie

Joined: April.08.07
Location: United States
Online Status: Offline
Posts: 28

Posted: April.09.07 at 6:51pm \| IP Logged

I apprenticed at Wiese Music Bandstand in Fort Worth, TX. The main woodwind tech that was there at the time, Roger Marsh, taught me. He was such a craftsman, I feel very lucky to have had the experience. He was a heavy drinker, and not much to have around in other respects, but put him at a bench and it was amazing what he could do. I also got to watch him make a 2-piece-custom-made pool cue at the lathe, it was beautiful when he was done.

If you wish to post a reply to this topic you must first login
If you are not already registered you must first register

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Login

New Member Registration
Retrieve Lost Password

Shout Box

(10/9 17:13) ChrisHarnett: Doesn't seem very promising
(10/6 12:46) DriverDrobina: Is this site still active?
(10/6 12:45) DriverDrobina: I have the same concern
(6/2 17:51) Wailinfree: is this site still active?
(6/2 17:51) Wailinfree: is this site still active?
(4/29 12:46) BENSCHILDGEN: Cleaning snakes nowdays SUCK!
(12/4 22:44) dparker: Hey Brent!
(11/26 20:46) crousfrench: I'm back. Did you miss me?
(10/9 7:18) BENSCHILDGEN: What's going on out there?
(6/1 18:53) dparker: dparker@ciomit.com www.ciomit.com
(6/1 18:53) dparker: or we can do an online meeting
(6/1 18:53) dparker: It can be dangerous. If you could send some pic
(5/25 5:17) BENSCHILDGEN: It seemed as if it was silver brazed together
(5/25 5:17) BENSCHILDGEN: It seemed as if it was silver brazed together
(5/25 5:9) BENSCHILDGEN: I had an old tuba that I could not get it apart.
(5/25 5:8) BENSCHILDGEN: I just do not know much about the whole mechainsm
(5/24 14:2) dparker: How can I help with the clock springs?
(5/24 14:2) dparker: How can I help with the clock springs?
(5/18 5:9) BENSCHILDGEN: MAYBE THIS SITE SHOULD BE LINKED TO FACEBOOK
(4/26 7:20) BENSCHILDGEN: I need info on tubas with clocksprings for levers
(4/4 8:34) dparker: Indeed! I will be posting more soon!ore soon!
(3/30 11:36) BENSCHILDGEN: Let's try to get this site flowing again
(7/6 19:46) Krch: My favorite is uses for electric soldering guns!
(6/13 9:0) crousfrench: I still enjoy watching the videos over and over
(6/13 8:59) crousfrench: I haven't seen anything new in awhile, but
(5/31 21:36) Krch: articles...articles