Professional Band Instrument Repair Technician Logo

Featured Member

ID: michaeldurocher
Since: 9/25/2005
From: Fort McMurray Canada
Rating: (0.0)

Featured Picture

Google Ads

  Active TopicsActive Topics  Display List of Forum MembersMemberlist  Search The ForumSearch  HelpHelp
Ultrasonics
 PROBIRT Forums » Ultrasonics
Subject Topic: Ultra sonic cleaner Post ReplyPost New Topic
Author
Message << Prev Topic | Next Topic >>
DamienThomas
Technician
Technician


Joined: February.23.05
Location: Australia
Online Status: Offline
Posts: 0
Posted: December.16.05 at 4:58pm | IP Logged Quote DamienThomas

I've made my own ultra sonic cleaning system using an old tub and a 2nd hand ultra sonic unit. When other techys use the 'ready made' ultra sonic units is the liquid cleaner changed each time the cleaner is used? As mine sits in a tub the solution gets dirty pretty quickly (despite a quick wash beforehand). What chemical liquid do others use? Is it a mild phospheric acid solution @approx 2%? (That's what I've been using) Any input is welcomed! (I live in Australia & don't have access to the usual range of products that my mates in the USA & Canada have)
THANKS
Back to Top View DamienThomas's Profile Search for other posts by DamienThomas
 
stevemarti
Technician
Technician


Joined: January.19.05
Location: USA
Online Status: Offline
Posts: 7
Posted: December.17.05 at 12:05pm | IP Logged Quote stevemarti

I don't currently have the business volume to justify the $$$ to buy a big commercial unit.

I have been considering rigging up an imersible unit to put in my shop utility sink. In my small table top unit I've had acceptable results with just water and simple green or sometimes Dawn dishwashing detergent.

Can you give us and idea of your setup's volume and power?
Back to Top View stevemarti's Profile Search for other posts by stevemarti
 
FredBattershell
Technician
Technician


Joined: January.13.05
Location: USA
Online Status: Offline
Posts: 2
Posted: January.04.06 at 5:25am | IP Logged Quote FredBattershell

Where can I buy a submersible portable UC unit such as you have?
Thanks for taking the time to reply.
Fred
Back to Top View FredBattershell's Profile Search for other posts by FredBattershell
 
DaveWeiner
Technician
Technician


Joined: January.19.05
Location: USA
Online Status: Offline
Posts: 10
Posted: July.26.07 at 6:06pm | IP Logged Quote DaveWeiner

Damien, I think you are on the right track for the solution. But yeah, it'll get dirty quickly. Our UPC unit has a filteration unit attached, and I use #2 household water filters. There's also a basket filter underneath the tank to pre-filter parts that may go down the old drain tube.

No matter what I do, I still only get about 3 months' use out of a gallon of 132A solution from UPC. If I didn't filter it, I'd probably change it monthly at least.
Back to Top View DaveWeiner's Profile Search for other posts by DaveWeiner Visit DaveWeiner's Homepage
 

If you wish to post a reply to this topic you must first login
If you are not already registered you must first register

  Post ReplyPost New Topic
Printable version Printable version

Forum Jump
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Powered by Web Wiz Forums version 7.9
Copyright ©2001-2004 Web Wiz Guide

This page was generated in 0.0469 seconds.

Login

Login to view contents and post messages and reviews
Username:
Password:

New Member Registration
Retrieve Lost Password

Shout Box

  • (10/9 17:13) ChrisHarnett: Doesn't seem very promising
  • (10/6 12:46) DriverDrobina: Is this site still active?
  • (10/6 12:45) DriverDrobina: I have the same concern
  • (6/2 17:51) Wailinfree: is this site still active?
  • (6/2 17:51) Wailinfree: is this site still active?
  • (4/29 12:46) BENSCHILDGEN: Cleaning snakes nowdays SUCK!
  • (12/4 22:44) dparker: Hey Brent!
  • (11/26 20:46) crousfrench: I'm back. Did you miss me?
  • (10/9 7:18) BENSCHILDGEN: What's going on out there?
  • (6/1 18:53) dparker: dparker@ciomit.com www.ciomit.com
  • (6/1 18:53) dparker: or we can do an online meeting
  • (6/1 18:53) dparker: It can be dangerous. If you could send some pic
  • (5/25 5:17) BENSCHILDGEN: It seemed as if it was silver brazed together
  • (5/25 5:17) BENSCHILDGEN: It seemed as if it was silver brazed together
  • (5/25 5:9) BENSCHILDGEN: I had an old tuba that I could not get it apart.
  • (5/25 5:8) BENSCHILDGEN: I just do not know much about the whole mechainsm
  • (5/24 14:2) dparker: How can I help with the clock springs?
  • (5/24 14:2) dparker: How can I help with the clock springs?
  • (5/18 5:9) BENSCHILDGEN: MAYBE THIS SITE SHOULD BE LINKED TO FACEBOOK
  • (4/26 7:20) BENSCHILDGEN: I need info on tubas with clocksprings for levers
  • (4/4 8:34) dparker: Indeed! I will be posting more soon!ore soon!
  • (3/30 11:36) BENSCHILDGEN: Let's try to get this site flowing again
  • (7/6 19:46) Krch: My favorite is uses for electric soldering guns!
  • (6/13 9:0) crousfrench: I still enjoy watching the videos over and over
  • (6/13 8:59) crousfrench: I haven't seen anything new in awhile, but
  • (5/31 21:36) Krch: articles...articles
SmartFlix.com How-To DVD Rental