PROBIRT Forums: Tone hole leveling flutes, saxes

Featured Member

ID: CColston
Since: 6/10/2013
From:
Rating: (0.0)

Featured Picture

Google Ads

Active Topics Display List of Forum Members

Memberlist

Help

General Woodwinds
PROBIRT Forums » General Woodwinds

Topic: Tone hole leveling flutes, saxes

Author

Message

<< Prev Topic | Next Topic >>

DamienThomas
Technician

Joined: February.23.05
Location: Australia
Online Status: Offline
Posts: 0

Posted: June.08.05 at 8:17pm \| IP Logged

What other methods of tone hole leveling are useful apart from tone hole files and pushing a tone hole from underneath (in the case of a sax tone hole that has a gap caused by a post etc in close proximity to the tone hole being pushed into the body). Rolled tone holes are especially a problem.Any suggestions?

JeffDening
Technician & Clinician

Joined: February.01.05
Location: USA
Online Status: Offline
Posts: 0

Posted: June.13.05 at 7:15am \| IP Logged

I occasionally use a prying method. You can use the tone hole protector/dent rod guide sold by Ferree's or make assorted "pac man" shaped tone hole protectors yourself. I prefer customizing my own pieces.

Use the tone hole protector to support some sort of burnishing rod (highly polished, small diameter). Burnish up the low spots being careful not to use too much pressure or too shallow an angle to create new low spots under the tonehole protector. DO NOT attempt on soldered toneholes unless you have nothing to do for the next several hours.

Let me know if I need to clarify further.
JD

JoePiccolo
Technician

Joined: January.17.05
Location: Canada
Online Status: Offline
Posts: 0

Posted: December.16.05 at 2:18pm \| IP Logged

Jim Thomas hasan AMAZING tool for raising dents from the inside of the sax. have raised some seriously "wonky" tone holes on a recent project.

It would be worth contacting him for more info......its a seriously well thought through tool....and will take your dent work to the next level.

Ciao

Joe

If you wish to post a reply to this topic you must first login
If you are not already registered you must first register

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Login

New Member Registration
Retrieve Lost Password

Shout Box

(10/9 17:13) ChrisHarnett: Doesn't seem very promising
(10/6 12:46) DriverDrobina: Is this site still active?
(10/6 12:45) DriverDrobina: I have the same concern
(6/2 17:51) Wailinfree: is this site still active?
(6/2 17:51) Wailinfree: is this site still active?
(4/29 12:46) BENSCHILDGEN: Cleaning snakes nowdays SUCK!
(12/4 22:44) dparker: Hey Brent!
(11/26 20:46) crousfrench: I'm back. Did you miss me?
(10/9 7:18) BENSCHILDGEN: What's going on out there?
(6/1 18:53) dparker: dparker@ciomit.com www.ciomit.com
(6/1 18:53) dparker: or we can do an online meeting
(6/1 18:53) dparker: It can be dangerous. If you could send some pic
(5/25 5:17) BENSCHILDGEN: It seemed as if it was silver brazed together
(5/25 5:17) BENSCHILDGEN: It seemed as if it was silver brazed together
(5/25 5:9) BENSCHILDGEN: I had an old tuba that I could not get it apart.
(5/25 5:8) BENSCHILDGEN: I just do not know much about the whole mechainsm
(5/24 14:2) dparker: How can I help with the clock springs?
(5/24 14:2) dparker: How can I help with the clock springs?
(5/18 5:9) BENSCHILDGEN: MAYBE THIS SITE SHOULD BE LINKED TO FACEBOOK
(4/26 7:20) BENSCHILDGEN: I need info on tubas with clocksprings for levers
(4/4 8:34) dparker: Indeed! I will be posting more soon!ore soon!
(3/30 11:36) BENSCHILDGEN: Let's try to get this site flowing again
(7/6 19:46) Krch: My favorite is uses for electric soldering guns!
(6/13 9:0) crousfrench: I still enjoy watching the videos over and over
(6/13 8:59) crousfrench: I haven't seen anything new in awhile, but
(5/31 21:36) Krch: articles...articles