PROBIRT Forums: Bassoon Bocal

Featured Member

ID: testip
Since: 12/29/2005
From: Testip United States
Rating: (0.0)

Featured Picture

Google Ads

Active Topics Display List of Forum Members

Memberlist

Help

General Woodwinds
PROBIRT Forums » General Woodwinds

Topic: Bassoon Bocal

Author

Message

<< Prev Topic | Next Topic >>

RonRobbins
Technician

Joined: January.13.05
Location: USA
Online Status: Offline
Posts: 5

Posted: January.17.06 at 8:34am \| IP Logged

I have a schools bassoon bocal with a 1 inch split on the side. What is the best way to repair the crack? I can only think of soldering a small patch over the split?

Thanks.

Ron
Band Instrument Repair Shop
Arizona

LarryMueller
Technician & Clinician

Joined: January.20.05
Location: USA
Online Status: Offline
Posts: 24

Posted: January.17.06 at 1:09pm \| IP Logged

Ron,

Bocals are really difficult to do much with, especially on a
school budget. Yes, I'd just patch it the best I could. Even Chip
Owen and other bassoon experts agree that a bocal is just
about impossible to put back totally right. I have also tried just
silver soldering them closed, but it's hard to get them cleaned
out enough first. If silver soldering the tip of the bocal, it can
actually melt, so use caution. Good luck.

Larry

IanWhite
Technician

Joined: January.11.05
Location: United Kingdom
Online Status: Offline
Posts: 10

Posted: January.18.06 at 4:19pm \| IP Logged

..... also if you try & silver solder it closed you risk unsoldering the original join, which is where they tend to split anyway.

Ian

motomom
Newbie
Newbie

Joined: April.08.07
Location: United States
Online Status: Offline
Posts: 28

Posted: April.09.07 at 1:36pm \| IP Logged

We usually patch them with thin brass. It doesn't look good, but most schools just need for it to work, they don't care how it looks. Bocals are so expensive to replace.

If you wish to post a reply to this topic you must first login
If you are not already registered you must first register

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Login

New Member Registration
Retrieve Lost Password

Shout Box

(10/9 17:13) ChrisHarnett: Doesn't seem very promising
(10/6 12:46) DriverDrobina: Is this site still active?
(10/6 12:45) DriverDrobina: I have the same concern
(6/2 17:51) Wailinfree: is this site still active?
(6/2 17:51) Wailinfree: is this site still active?
(4/29 12:46) BENSCHILDGEN: Cleaning snakes nowdays SUCK!
(12/4 22:44) dparker: Hey Brent!
(11/26 20:46) crousfrench: I'm back. Did you miss me?
(10/9 7:18) BENSCHILDGEN: What's going on out there?
(6/1 18:53) dparker: dparker@ciomit.com www.ciomit.com
(6/1 18:53) dparker: or we can do an online meeting
(6/1 18:53) dparker: It can be dangerous. If you could send some pic
(5/25 5:17) BENSCHILDGEN: It seemed as if it was silver brazed together
(5/25 5:17) BENSCHILDGEN: It seemed as if it was silver brazed together
(5/25 5:9) BENSCHILDGEN: I had an old tuba that I could not get it apart.
(5/25 5:8) BENSCHILDGEN: I just do not know much about the whole mechainsm
(5/24 14:2) dparker: How can I help with the clock springs?
(5/24 14:2) dparker: How can I help with the clock springs?
(5/18 5:9) BENSCHILDGEN: MAYBE THIS SITE SHOULD BE LINKED TO FACEBOOK
(4/26 7:20) BENSCHILDGEN: I need info on tubas with clocksprings for levers
(4/4 8:34) dparker: Indeed! I will be posting more soon!ore soon!
(3/30 11:36) BENSCHILDGEN: Let's try to get this site flowing again
(7/6 19:46) Krch: My favorite is uses for electric soldering guns!
(6/13 9:0) crousfrench: I still enjoy watching the videos over and over
(6/13 8:59) crousfrench: I haven't seen anything new in awhile, but
(5/31 21:36) Krch: articles...articles